|
Part No.
|
Name
of Rail Clamp |
Description |
Price |
332-01 |
Standard |
Made of
brass with stainless steel Allen-head screws to be used without
original joiner. They clamp around bottom flange and centre
web of rail for a good surface contact with the rail |
£1.60
each |
| 332-02 |
Overjoiner |
Made of
brass with stainless steel Allen-head screws. Fits over original
joiner. If your track is already down and you don’t want
to remove the original rail joiner this over joiner is the one
for you |
£1.60
each |
| 332-01P |
Insulated |
Made of
dark grey plastic. Best way to create gaps in the rail whilst
still holding the rail in place |
£2.25 each
|
| 332-015 |
Power |
Made of
brass with stainless steel Allen-head screws to connect power
to the rail. Just crimp the wire to the connector |
£1.60 each
|
332-01L |
Extended |
Made
of brass with stainless steel Allen-head screws. Made for
anywhere extra strong and/or long joints are needed. These
rail clamps are 1" long. |
£5.00
each |
332-1WS |
Wheel
Stop |
Made
of brass with stainless steel Allen-head screws. Made to replace
bumpers at end of line |
£11.50 per pair
|
332-010T
|
Lift-Out
Bridge |
Top
rail clamp made of brass with stainless steel Allen-head screws.
Used for lift out bridges, hinged bridges or any lift out
application. One side has a ball plunger screw that snaps
the rail in place. You can use two pairs and lift out a bridge
you that do no want to leave outside |
£14.50
per pair |
332-01AD |
Adapter
|
Made
of brass with stainless steel Allen-head screws to adapt code
332 rail to code 250. Ideal for connecting LGB or Aristo-craft
to code 250 rail |
£6.50
per pair |
250-01 |
Standard |
Made
of brass with stainless steel Allen-head screws to be used
without original joiner. They clamp around bottom flange and
centre web of rail for a good surface contact with the rail
|
£1.75
each |
250-01N |
Nickel
Standard |
Made
of brass and are nickel plated. They clamp around bottom flange
and centre web for good surface contact with rail. |
£2.10 each |
250-015 |
Power |
Made of brass with stainless steel Allen-head screws to connect
power to the rail. Just crimp the wire to the connector
|
£1.60
each |
250-01P |
Insulated |
Made
of dark grey plastic. Best way to create gaps in the rail
whilst still holding the rail in place |
£1.60
each |
MRS |
|
Midget
Ratchet Set - make fast work of installing your rail clamps
with this ratchet extension and bit. The bit can also be used
in a power driver. |
£13 |
LBBD |
|
Long
Blade Ball Drive - this tool has a ball at the end to make
it easier to install your Hillman's Rail Clamps. Great for
hard to reach places or awkward angles. |
|
